Cisco Cisco Aironet 1140 Access Point Prospecto
Internal Web Authentication for Guest Access on
Autonomous APs Configuration Example
Autonomous APs Configuration Example
Document ID: 116897
Contributed by Mohammad Aldehnee, Cisco TAC Engineer.
Dec 17, 2013
Dec 17, 2013
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
AP Configuration
Configure the Wireless Client
Verify
Troubleshoot
Customization
Prerequisites
Requirements
Components Used
Background Information
AP Configuration
Configure the Wireless Client
Verify
Troubleshoot
Customization
Introduction
This document describes how to configure for guest access on autonomous Access Points (APs) with the use
of the internal web page that is embedded in the AP itself.
of the internal web page that is embedded in the AP itself.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics before you attempt this configuration:
How to configure autonomous APs for basic operation
•
How to configure the local RADIUS server on autonomous APs
•
How web authentication as a Layer 3 security measure works
•
Components Used
The information in this document is based on these software and hardware versions:
AIR−CAP3502I−E−K9 that runs Cisco IOS
®
image 15.2(4)JA1
•
Intel Centrino Advanced−N 6200 AGN wireless adapter (Driver Version 13.4.0.9)
•
Microsoft Windows 7 supplicant utility
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.