Cisco Cisco Catalyst Blade Switch 3030 for Dell Notas de publicación

The Cisco IOS image is stored as a bin file in a directory that is named with the Cisco IOS release. A 
subdirectory contains the files needed for web management. The image is stored on the system board 
flash device (flash:).

You can use the show version privileged EXEC command to see the software version that is running on 
your switch. The second line of the display shows the version.

You can also use the dir filesystem: privileged EXEC command to see the directory names of other 
software images that you might have stored in flash memory.

The upgrade procedures in these release notes describe how to perform the upgrade by using a combined 
tar file. This file contains the Cisco IOS image file and the files needed for the embedded device 
manager. You must use the combined tar file to upgrade the switch through the device manager. To 
upgrade the switch through the command-line interface (CLI), use the tar file and the archive 
download-sw privileged EXEC command.

 lists the filenames for this software release. 

Before upgrading your switch software, make sure that you have archived copies of the current Cisco 
IOS release and the Cisco IOS release to which you are upgrading. You should keep these archived 
images until you have upgraded all devices in the network to the new Cisco IOS image and until you 
have verified that the new Cisco IOS image works properly in your network.

Cisco routinely removes old Cisco IOS versions from Cisco.com. See Product Bulletin 2863 for more 
information:

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps5187/prod_bulletin0900aecd80281c0e.
Html

You can copy the binary software image file (with the .bin suffix) on the flash memory to the appropriate 
TFTP directory on a host by using the copy flash: tftp: privileged EXEC command. 

cbs30x0-lanbase-tar.122-25.SEE.tar

Cisco Catalyst Blade Switch 3030 base image and 
device manager files.

cbs30x0-lanbasek9-tar.122-25.SEE.tar

Cisco Catalyst Blade Switch 3030 cryptographic image 
and device manager files. 

This image has the Kerberos and SSH features.

You must download the cryptographic image 
file from Cisco.com.