Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP) Notas de publicación
4
Release Notes for Cisco ONS 15454, ONS 15454 M2, and ONS 15454 M6 DWDM, Release 9.3
OL-25124-02
New Features and Functionality
New Features and Functionality
This section highlights new features and functionality for Release 9.3. For detailed documentation of
each of these features, consult the user documentation.
each of these features, consult the user documentation.
Common Hardware
Cisco ONS 15454 Software Release 9.3 supports the following new hardware:
•
•
•
•
•
•
Fabric Card, Line Card, and CPT 50 Panel
The Carrier Packet Transport (CPT) is released in 9.3. The fabric card, line card, and CPT 50 panel are
supported on the CPT 200 and CPT 600 chassis.
supported on the CPT 200 and CPT 600 chassis.
The fabric card is a single slot card with two 10GE SFP+ ports and two 10GE XFP ports. The XFP ports
on the fabric card support the Optical Transport Network (OTN) protocol. The fabric card runs the route
processor version of IOS. The fabric card provides high availability and high switching capacity.
on the fabric card support the Optical Transport Network (OTN) protocol. The fabric card runs the route
processor version of IOS. The fabric card provides high availability and high switching capacity.
The line card has four 10GE SFP+ ports. The SFP+ ports on the line card serve as normal ports or
InterConnect (IC) ports. The line card runs the line card version of IOS. The line card expands the I/O
capacity of CPT 200 and 600 chassis by interconnecting with other line and fabric cards.
InterConnect (IC) ports. The line card runs the line card version of IOS. The line card expands the I/O
capacity of CPT 200 and 600 chassis by interconnecting with other line and fabric cards.
The CPT 50 panel has 4 10GE SFP+ ports and 44 GE SFP ports. The CPT 50 panel is not placed in the
CPT 200 or CPT 600 shelf. The CPT 50 panel enables the number of ports to be scaled on the CPT
system.
CPT 200 or CPT 600 shelf. The CPT 50 panel enables the number of ports to be scaled on the CPT
system.
For more information, please refer to Release Notes for Cisco CPT-CTC and Documentation Release 9.3
and Cisco IOS Release 15.1(01)SA and Cisco CPT Configuration Guide-CTC and Documentation
Release 9.3 and Cisco IOS Release 15.1(01)SA.
and Cisco IOS Release 15.1(01)SA and Cisco CPT Configuration Guide-CTC and Documentation
Release 9.3 and Cisco IOS Release 15.1(01)SA.
15454-M-RAMAN-CTP and 15454-M-RAMAN-COP Cards
(DWDM only) The 15454-M-RAMAN-CTP and 15454-M-RAMAN-COP cards are single-slot units that
support counter and co-propagating Raman amplification on very long unregenerated spans. The
counter-propagating 15454-M-RAMAN-CTP card is the master unit. The co-propagating
15454-M-RAMAN-COP card is the slave unit and can be used only when the counter-propagating unit
is present. The 15454-M-RAMAN-CTP and 15454-M-RAMAN-COP units must be installed in adjacent
slots (Slots 2 and 3, 4 and 5, or 6 and 7) in the ONS 15454 M6 chassis and Slots 2 and 3 in the ONS
15454 M2 chassis. The cards manage up to 96 ITU-T 50-GHz spaced channels over the C-band of the
optical spectrum (wavelengths from 1528.77nm to 1566.72nm).
support counter and co-propagating Raman amplification on very long unregenerated spans. The
counter-propagating 15454-M-RAMAN-CTP card is the master unit. The co-propagating
15454-M-RAMAN-COP card is the slave unit and can be used only when the counter-propagating unit
is present. The 15454-M-RAMAN-CTP and 15454-M-RAMAN-COP units must be installed in adjacent
slots (Slots 2 and 3, 4 and 5, or 6 and 7) in the ONS 15454 M6 chassis and Slots 2 and 3 in the ONS
15454 M2 chassis. The cards manage up to 96 ITU-T 50-GHz spaced channels over the C-band of the
optical spectrum (wavelengths from 1528.77nm to 1566.72nm).