Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP) Guía De Instalación
9
Installing the 32WSS-L Card in the Cisco ONS 15454 SONET/SDH
78-17342-01
Install the 32WSS-L Card
–
Operating humidity: 5 to 95 percent RH
•
Dimensions
–
Height: 12.65 in. (321.3 mm)
–
Width: 1.84 in. (46.8 mm)
–
Depth: 9.00 in. (228.6 mm)
Install the 32WSS-L Card
Warning
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Warning
Class 1M laser radiation when open. Do not view directly with optical instruments. Statement 1053
Warning
Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do
not view directly with optical instruments. Viewing the laser output with certain optical instruments
(for example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye
hazard. Statement 1056
not view directly with optical instruments. Viewing the laser output with certain optical instruments
(for example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye
hazard. Statement 1056
Caution
Always use the supplied ESD wristband when working with a powered ONS 15454. Plug the wristband
cable into the ESD jack located on the lower-right outside edge of the shelf assembly.
cable into the ESD jack located on the lower-right outside edge of the shelf assembly.
Note
If protective clips are installed on the card connectors, remove the clips before installing the cards.
Note
If you install a card incorrectly, the FAIL LED flashes continuously.
shows general card installation.