Cisco Cisco ONS 15454 M6 Multiservice Transport Platform (MSTP)
Procedure
Step 1
Complete the "NTP-G103 Back Up the Database" procedure in the chapter, "Maintain the Node" of the Cisco ONS 15454
DWDM Configuration Guide.
DWDM Configuration Guide.
Step 2
Perform any of the following tasks as needed:
•
DLP-G197 Modify SNMP Trap Destinations, on page 93
•
DLP-G198 Delete SNMP Trap Destinations, on page 94
Step 3
Complete the "NTP-G103 Back Up the Database" procedure in the chapter, "Maintain the Node" of the Cisco ONS 15454
DWDM Configuration Guide.
Stop. You have completed this procedure.
DWDM Configuration Guide.
Stop. You have completed this procedure.
DLP-G197 Modify SNMP Trap Destinations
This task modifies the SNMP trap destinations on an ONS
15454 node including community name, default User Datagram
Protocol (UDP) port, SNMP trap version, and maximum traps
per second.
15454 node including community name, default User Datagram
Protocol (UDP) port, SNMP trap version, and maximum traps
per second.
Purpose
None
Tools/Equipment
"DLP-G46 Log into CTC" task in the "
" document.
Prerequisite Procedures
As needed
Required/As Needed
Onsite or remote
Onsite/Remote
Provisioning or higher
Security Level
Procedure
Step 1
In node view (single-shelf mode) or multishelf view (multishelf mode), click the Provisioning > SNMP tabs.
Step 2
Select a trap from the Trap Destinations area.
For a description of SNMP traps, refer to the "
For a description of SNMP traps, refer to the "
" document.
Step 3
Highlight the Destination row field entry in the Community column and change the entry to another valid community
name.
The community name is a form of authentication and access control. The community name assigned to the ONS 15454 is
case-sensitive and must match the community name of the network management system (NMS).
name.
The community name is a form of authentication and access control. The community name assigned to the ONS 15454 is
case-sensitive and must match the community name of the network management system (NMS).
93