Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP)
2
Configuring GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Cards Using PCLI
OL-25022-01
Before You Begin
•
•
•
•
•
.
•
•
•
•
•
•
NTP-G222 Access PCLI Text Interface
Step 1
Complete the
task
at the node where you want to access PCLI. If you are
already logged in, continue with
Step 2
PCLI can be accesses in the following ways:
•
To access PCLI text interface using CTC, select Tools > Open Pseudo IOS Connection menu
option or right-click on the node in the Network View and select Open Pseudo IOS Connection.
option or right-click on the node in the Network View and select Open Pseudo IOS Connection.
•
To access PCLI from the command prompt, telnet or SSH may be used depending on the access state
set for PCLI access in Provisioning > Security > Pseudo IOS Access in Node view. If the access
state is set to the default state, non-secure, a PCLI session can be established using telnet as shown
in the following procedure:
set for PCLI access in Provisioning > Security > Pseudo IOS Access in Node view. If the access
state is set to the default state, non-secure, a PCLI session can be established using telnet as shown
in the following procedure:
Purpose
This procedure explains how to access PCLI text interface using CTC or
Telnet.
Telnet.
Tools/Equipment
None
Prerequisite Procedures None
Required/As Needed
As needed
Onsite/Remote
Onsite or remote
Security Level
Retrieve or higher