Cisco Cisco ONS 15454 M6 Multiservice Transport Platform (MSTP)
Before you monitor performance, be sure you have created the
appropriate circuits and provisioned the card according to your
specifications. For more information, see the chapters "Create
Optical Channel Circuits and Provisionable Patchcords",
"Provision Transponder and Muxponder Cards", and "Change
DWDM Card Settings" in the Cisco ONS 15454 DWDM Line
Card Configuration Guide .
appropriate circuits and provisioned the card according to your
specifications. For more information, see the chapters "Create
Optical Channel Circuits and Provisionable Patchcords",
"Provision Transponder and Muxponder Cards", and "Change
DWDM Card Settings" in the Cisco ONS 15454 DWDM Line
Card Configuration Guide .
Prerequisite Procedures
As needed
Required/As Needed
Onsite or remote
Onsite/Remote
Retrieve or higher
Security Level
Procedure
Step 1
Complete the "DLP-G46 Log into CTC" task at
at the node that you want to monitor.
If your are already logged in, continue with
.
Step 2
As needed, use the following tasks to change the display of PM counts:
•
DLP-G131 Refresh PM Counts at 15-Minute Intervals , on page 52
•
DLP-G132 Refresh PM Counts at One-Day Intervals, on page 53
•
DLP-G133 View Near-End PM Counts, on page 54
•
DLP-G134 View Far-End PM Counts, on page 55
•
DLP-G135 Reset Current PM Counts, on page 56
•
DLP-G136 Clear Selected PM Counts, on page 57
•
DLP-G410 Clear All PM Thresholds, on page 58
•
•
DLP-G138 Refresh PM Counts for a Different Port, on page 60
Stop. You have completed this procedure.
DLP-G131 Refresh PM Counts at 15-Minute Intervals
This task changes the window view to display PM counts in
15-minute intervals.
15-minute intervals.
Purpose
None
Tools/Equipment
52