Cisco Cisco Prime Network 3.8 Notas de publicación

 identifies the caveats resolved in Prime Network 3.8.

OSPFv3 neighbors are not modeled for Nexus 7000 device

For both IOS and IOX devices, BGP does not model in Prime Network if the BGP AS number contains a dot

OSPF neighbor down alarm is not parsed from Cisco 3825 device

Memory usage information is not available for Nexus 5000 device

CDP neighbors detail command does not list all IPv4 and IPv6 entries on IOS XR platform

CSCts74887

MPLS LDP does not support IPv6-only interfaces on IOS XR platform

CSCts48120

MPLS LDP session up trap is not correlated to Link up ticket for Cisco 3800 device

ATM IMA modeling issues occur on Cisco 7200 device with PA-IMA-E1 and PA-IMA-T1 modules

CSCts23284

VLAN interfaces on Catalyst WS-C4948 devices are not modeled properly

CSC pathtrace fails because of wrong Top Label in the path.

CSCtr56846

Investigation State for a device does not match its Communication State

In Admin mode, Prime Network Change and Configuration Management may copy the running 
configuration instead of the admin configuration

Activating Image Command Builder script fails

CSCtq61427

Some of the registrations fail in the LCM report and return the "Error Unrecoverable" message

Wrong PID shown for transceiver/SFP modules for Nexus 7000 device

Ticket Property: Correlation Tab export does not include Severity or Alarm ID

Column names in Cisco ANA EventVision differ from Filter dialog box fields

Power Down scenario results in 2 identical Device Unreachable tickets

Line Up/Down syslog message not associated with EFP

Missing association for cefc FRU Removed traps on Cisco ASR 9000 devices

Cannot change to a previous password after unchecking the Last 5 Passwords check box

Cisco IOS XR Report - Support ModularOS OS version

File transfer of Detailed Traps Report is very slow for PDF files 

When switching over in H/A, VNEs become stuck in Maintenance mode

IP interface link is not modeled for Port Channels on Cisco Nexus 7000 series devices 

Embedded restore script starts Prime Network at the end of the restore procedure

V1 traps are not displayed in Cisco ANA NetworkVision if varbind list is empty

Dashboard indicates wrong number of config changes