Cisco PowerKEY CableCARD Module 800 Guía De Instalación
Manually Configure the PCG
78-4017672-01 Rev E
99
Configure the /etc/sysconfig/network-scripts/ifcfg-eth1 File
1 From the PCG, open the file /etc/sysconfig/network-scripts/ifcfg-eth1.
2 Set the value of BOOTPROTO to static.
3 Set the value of the IPADDR to match the value of SCS Interface IP Address
2 Set the value of BOOTPROTO to static.
3 Set the value of the IPADDR to match the value of SCS Interface IP Address
used in the DNCS/ISDS GUI.
Example: If the value of SCS Interface IP Address is 172.140.10.1, the parameter
setting will be IPADDR=172.140.10.1.
Example: If the value of SCS Interface IP Address is 172.140.10.1, the parameter
setting will be IPADDR=172.140.10.1.
4 Set the value of NETMASK to match the value of SCS Interface Subnet Mask
used in the DNCS/ISDS GUI.
Example: If the value of SCS Interface Subnet Mask is 255.255.255.0, the
parameter setting will be NETMASK=255.255.255.0.
Example: If the value of SCS Interface Subnet Mask is 255.255.255.0, the
parameter setting will be NETMASK=255.255.255.0.
5 Set the value of ONBOOT to yes.
Configure the /etc/sysconfig/network-scripts/route-eth0 File
1 From the PCG, open the /etc/sysconfig/network-scripts/route-eth0 file in an
editor.
2 Add the following lines:
GATEWAY0=[PCG IP Default Gateway]
NETMASK0=0.0.0.0
ADDRESS0=0.0.0.0
GATEWAY1=[PCG IP Default Gateway]
NETMASK1=255.255.255.255
ADDRESS1=[RPCServerIPAddress from Step 5]
Example: If the value of PCG IP Default Gateway from the DNCS/ISDS GUI is
172.18.0.254 and the value of RPCServerIPAddress you you recorded in step 3 of
Copy Files to PCG (on page 96) is 10.250.0.1, you will add the following lines:
GATEWAY0=172.18.0.254
NETMASK0=0.0.0.0
ADDRESS0=0.0.0.0
NETMASK0=0.0.0.0
ADDRESS0=0.0.0.0
GATEWAY1=[PCG IP Default Gateway]
NETMASK1=255.255.255.255
ADDRESS1=[RPCServerIPAddress from Step 5]
Example: If the value of PCG IP Default Gateway from the DNCS/ISDS GUI is
172.18.0.254 and the value of RPCServerIPAddress you you recorded in step 3 of
Copy Files to PCG (on page 96) is 10.250.0.1, you will add the following lines:
GATEWAY0=172.18.0.254
NETMASK0=0.0.0.0
ADDRESS0=0.0.0.0