Cisco Multi-Stream CableCARD Module Guía De Instalación
Chapter 2 PKES Platform Installation
16
4034718 Rev B
Activate the PKES Platform Configuration
After installing the PKES platform software and editing the network interface and
router files, follow these instructions to activate those changes, and to test the
connection between the ISDS and the PKES.
1 Ensure that the network cables are connected to the PKES.
2 While logged into the PKES, type shutdown -y -g0 -i6 and then press Enter to
router files, follow these instructions to activate those changes, and to test the
connection between the ISDS and the PKES.
1 Ensure that the network cables are connected to the PKES.
2 While logged into the PKES, type shutdown -y -g0 -i6 and then press Enter to
reboot the PKES server and activate the PKES platform configuration.
3 After the PKES has rebooted, from an xterm window on the ISDS, type
ping [IP Address of the PKES] and then press Enter to verify connectivity.