Cisco Multi-Stream CableCARD Module Guía De Instalación
Upgrade the PKES Software
4034718 Rev B
49
Enable Support for Clear DRM VOD Assets (Optional)
Complete these instructions only if you require support for clear DRM VOD assets.
1 On the PKES, type vi /etc/init.d/pkesd and then press Enter. The pkesd file
1 On the PKES, type vi /etc/init.d/pkesd and then press Enter. The pkesd file
opens for editing in the vi text editor.
2 Add the following entry below the line that reads PKES=pkes
export PKES_ENABLE_TSC_CLEAR=1
Note: The top portion of the pkesd file should look similar to the following
example when you are finished:
RETVAL=0
prog="pkes"
PKES_DIR=/usr/local/pkes/bin
PKES=pkes
export PKES_ENABLE_TSC_CLEAR=1
Note: The top portion of the pkesd file should look similar to the following
example when you are finished:
RETVAL=0
prog="pkes"
PKES_DIR=/usr/local/pkes/bin
PKES=pkes
export PKES_ENABLE_TSC_CLEAR=1
3 Save and close the pkesd file. Continue with Initializing the PKES Upgrade (on
page 49).
Initializing the PKES Upgrade
1 From an xterm window on the ISDS, type ssh root@[PKES_IP] and press Enter.
The password prompt appears.
2 Type the root password and press Enter.
3 Type shutdown -y -g0 -i6 and then press Enter to reboot the PKES server and
3 Type shutdown -y -g0 -i6 and then press Enter to reboot the PKES server and
implement the restored configuration files.
4 Once the PKES server has rebooted, from the ISDS, type ping [PKES_IP] and
then press Enter to verify communications between the ISDS and PKES server.
5 Was the response from the ping command successful?
If yes, continue with Installing the PKES MSK.
If no, contact Cisco Services for assistance.
Installing the PKES MSK
1 Did you previously upgrade the PKES platform software?
If yes, continue with step 2.
If no, skip to Verifying the PKES Upgrade (on page 50).
2 From an xterm window on the ISDS, type
scp /export/home/dncs/vodMsk/vodMskPkes
root@<PKES_IP>:/usr/local/pkes/bin/vodMskPkes and then press Enter to copy
the PKES MSK file onto the PKES server.
root@<PKES_IP>:/usr/local/pkes/bin/vodMskPkes and then press Enter to copy
the PKES MSK file onto the PKES server.
3 At the password prompt, type the root password for the PKES server.
4 Type ssh root@[PKES_IP] and press Enter. The password prompt appears.
5 Type the root password and press Enter.
4 Type ssh root@[PKES_IP] and press Enter. The password prompt appears.
5 Type the root password and press Enter.