Cisco PowerKEY CableCARD Module 800 Guía De Instalación
Chapter 5 PKES Upgrade Procedures
40
4034718 Rev B
Upgrade the PKES Software
Complete the procedures in this section for each PKES server to be upgraded.
Important: Note these important points:
A keyboard and monitor must be connected to the PKES server before beginning
the upgrade of the PKES platform software.
the upgrade of the PKES platform software.
The PKES MSK file is required to complete the upgrade of the PKES platform
software. This file should be onsite prior to beginning these upgrade procedures.
software. This file should be onsite prior to beginning these upgrade procedures.
Determining the PKES Platform Software Version
Before you begin, obtain the expected platform version of the PKES from your Cisco
account manager. Then, complete the following steps to determine the current PKES
platform software version.
1 From an xterm window on the ISDS, type ssh root@[PKES_IP] and then press
account manager. Then, complete the following steps to determine the current PKES
platform software version.
1 From an xterm window on the ISDS, type ssh root@[PKES_IP] and then press
Enter.
Note: Substitute the IP address of the PKES server for [PKES_IP].
Important: The root password is not included in these procedures. If you need
the root password, contact Cisco Services.
Note: Substitute the IP address of the PKES server for [PKES_IP].
Important: The root password is not included in these procedures. If you need
the root password, contact Cisco Services.
2 Type rpm -qi SAIlxplat and then press Enter to obtain the current version of the
PKES platform software.
Example: The following example illustrates Version 1.0.4 of the PKES platform
software.
Example: The following example illustrates Version 1.0.4 of the PKES platform
software.
Name
SAIxplat
Relocations: (not
relocatable)
relocatable)
Version
1.0.4
Vendor: Cisco Systems, Inc.
Release
1
Build Date: Tue 12 May 2009
10:32:21 AM EDT
10:32:21 AM EDT
Install
Date
Date
Tue 16 Jun 2009
04:30:53 AM EDT
04:30:53 AM EDT
Build Host:
sausatlpcg01.dvsg.sciatl.com
sausatlpcg01.dvsg.sciatl.com
Group
System
Environment/Base
Environment/Base
Source RPM: SAIlxplat-1.0.4-
1.src.rpm
1.src.rpm
Size
0
License: Proprietary
Signature (none)
Packager SPVTG
Summary
SAI Linux Platform Package (RHEL 5.1)
Descripti
on
on
The base platform for Linux based products.
This rpm is used to track the platform release
version.
This rpm is used to track the platform release
version.