Cisco PowerKEY CableCARD Module 800 Guía De Instalación
Chapter 5 PKES Upgrade Procedures
42
4034718 Rev B
6 Record the following information for later use:
PKES MGMT IP address:
____________________
PKES MGMT Subnet Mask: ____________________
PKES Default Gateway:
____________________
7 Did the PKES server have the desired platform software version, as determined
in Determining the PKES Platform Software Version (on page 40)?
If yes, skip to Upgrading the PKES Application Software (on page 42).
If no, continue with Upgrading the PKES Platform Software (on page 42).
Upgrading the PKES Platform Software
1 From the attached keyboard and monitor, log on to the PKES server as root user.
2 Type shutdown -y -g0 -i6 and then press Enter to reboot the PKES server.
3 Once the server has begun the reboot process, press the CD/DVD eject button to
2 Type shutdown -y -g0 -i6 and then press Enter to reboot the PKES server.
3 Once the server has begun the reboot process, press the CD/DVD eject button to
the drive on the server.
4 Insert the PKES platform CD into the drive tray and close the tray. After a few
minutes, the Cisco screen appears.
5 Type platform and then press Enter. The PKES runs an automated installation
script and the following warning message may appear:
The partition table on the device sda was unreadable … Would you like to
initialize this drive, erasing ALL DATA?
The partition table on the device sda was unreadable … Would you like to
initialize this drive, erasing ALL DATA?
6 Type y and then press Enter. The installation script continues.
Note: The installation script should complete within 15 minutes.
7 Go to Upgrading the PKES Application Software.
Upgrading the PKES Application Software
1 Did you just complete an upgrade of the PKES platform software?
If yes, continue with step 2.
If no, skip to step 4.
2 From the attached keyboard and monitor, login to the PKES server as root user.
3 Follow these directions to create a directory for mounting the PKES application
3 Follow these directions to create a directory for mounting the PKES application
CD.
a Type mkdir -p /media/cdrom and then press Enter.
b Skip to step 7.
a Type mkdir -p /media/cdrom and then press Enter.
b Skip to step 7.