Cisco PowerKEY CableCARD Module 801 Referencia técnica
2
4020737 Rev C
Overview
Scope
This document enables Cisco Digital Network Control System (DNCS) operators to
modify their systems so that they are able to bind up to 1500 CableCARD modules
and set-tops during a staging period. This document does not provide instructions
for staging CableCARD modules or binding modules to set-tops. For assistance with
CableCARD staging and binding, refer to the documents listed in Related
Publications (on page 2).
modify their systems so that they are able to bind up to 1500 CableCARD modules
and set-tops during a staging period. This document does not provide instructions
for staging CableCARD modules or binding modules to set-tops. For assistance with
CableCARD staging and binding, refer to the documents listed in Related
Publications (on page 2).
Audience
This document is written for Cisco DNCS operators who manage their systems using
any of the following system releases:
any of the following system releases:
SR 2.2/3.2 Service Pack (SP) 5 and later
SR 2.5/3.5/4.0 SP 3 (Patch 3) and later
SR 2.7/3.7/4.2 and later
Important! SR 2.2/3.2 SP 5 does not support the combo-binding staging method.
For a list of the staging methods supported in each release, refer to Separable Security
Host Staging Guide.
For a list of the staging methods supported in each release, refer to Separable Security
Host Staging Guide.
[
Related Publications
You may find the following publications useful as resources when you implement
the procedures in this document. Check the copyright date on your resources to
assure that you have the most current version. The publish dates for the following
documents are valid as of this printing. However, some of these documents may
have since been revised:
the procedures in this document. Check the copyright date on your resources to
assure that you have the most current version. The publish dates for the following
documents are valid as of this printing. However, some of these documents may
have since been revised:
Best Practices for Using Multi-Stream CableCARD
Modules (part number 4005658,
expected publish date: mid-year 2007)
Best Practices for Using Single-Stream PowerKEY
®
CableCARD
Modules (part
number 4015091, published September 2006)
Preparing for SSC Host DHCT Deployment (part number 4020566, published June
2007)
2007)
Separable Security Host Staging Guide (part number 736107, published May 2007)