Cisco Cisco D9804 Multiple Transport Receiver Guía De Instalación
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Chapter 5 Setup and Monitoring
108
78-4042990-01 Rev B
Setting up ASI Input
Proceed as follows to set the ASI Input:
1 From the user interface of the D9804 MTR, click the Setup tab, and then click the
1 From the user interface of the D9804 MTR, click the Setup tab, and then click the
ASI-IN icon from the sub-page.
2 Select the Comma Required to allow the use of direct DTF ASI output as an
input source to the D9804 MTR. Select the comma required value as needed.
Select 0 to allow up to the maximum DTF output rate.
Note: If the D9804 MTR is used to decombine and descramble the output data
from the ASI Input, then a maximum rate for the input containing scrambled
PIDs is 140 Mbps.
Select 0 to allow up to the maximum DTF output rate.
Note: If the D9804 MTR is used to decombine and descramble the output data
from the ASI Input, then a maximum rate for the input containing scrambled
PIDs is 140 Mbps.