Cisco Cisco Content Acquirer Application Notas de publicación
6
Release Notes for Cisco Internet Streamer CDS 2.5.7
OL-20688-02
System Requirements
System Requirements
The Internet Streamer CDS runs on the CDE100, CDE200, CDE205, and the CDE220 hardware models.
lists the different device modes for the Cisco Internet Streamer CDS software, and which CDEs
support them.
Release 2.5.7 supports the CDE220-2S3i platform. There are a total of 14
gigabit Ethernet ports in this
CDE. The first two ports (1/0 and 2/0) are management ports. The remaining 12 gigabit Ethernet ports
can be configured as two port channels. See the Cisco Content Delivery Engine CDE205/220/420
Hardware Installation Guide for set up and installation procedures for the CDE220-2S3i and the Cisco
Internet Streamer CDS 2.5 Software Configuration Guide for information on configuring the Multi Port
Support feature.
can be configured as two port channels. See the Cisco Content Delivery Engine CDE205/220/420
Hardware Installation Guide for set up and installation procedures for the CDE220-2S3i and the Cisco
Internet Streamer CDS 2.5 Software Configuration Guide for information on configuring the Multi Port
Support feature.
The CDE220-2G2 platform has a total of ten gigabit Ethernet ports. The first two ports (1/0 and 2/0) are
management ports. The remaining eight gigabit Ethernet ports can be configured as one port channel.
See the Cisco Content Delivery Engine CDE205/220/420 Hardware Installation Guide for set up and
installation procedures for the CDE220-2G2.
management ports. The remaining eight gigabit Ethernet ports can be configured as one port channel.
See the Cisco Content Delivery Engine CDE205/220/420 Hardware Installation Guide for set up and
installation procedures for the CDE220-2G2.
The CDE100 can run as the CDSM, while theCDE200 can run as the Service Router or the Service
Engine. See the Cisco Content Delivery Engine CDE100/200/300/400 Hardware Installation Guide for
set up and installation procedures for the CDE100 and CDE200.
Engine. See the Cisco Content Delivery Engine CDE100/200/300/400 Hardware Installation Guide for
set up and installation procedures for the CDE100 and CDE200.
The CDE205 can run as the CDSM, Service Router, or Service Engine. See the Cisco Content Delivery
Engine CDE205/220/420 Hardware Installation Guide for set up and installation procedures for the
CDE205.
Engine CDE205/220/420 Hardware Installation Guide for set up and installation procedures for the
CDE205.
Note
For performance information, see the release-specific performance bulletin.
Table 2
Supported CDEs
Device Mode
CDE100
CDE200
CDE205
CDE220
CDSM
Yes
No
Yes
No
SR
Yes
Yes
Yes
Yes
SE
Yes
Yes
Yes
Yes