Cisco Headend System Release 2.7 Guía De Instalación
Chapter 1 Initial Installation of RNCS Software
24
78-4021167-01 Rev D
29 Type the root password a second time and then press the Esc and 2 keys
simultaneously.
Result: The installation process continues and the console login prompt appears
Result: The installation process continues and the console login prompt appears
when the installation process has ended.
30 Log on to the RNCS through the console port as root user.
31 Go to
31 Go to
Running the create_sysidcfg Script (on page 24).
Running the create_sysidcfg Script
The create_sysidcfg script creates a sysidcfg file in a specified directory and writes
system identification configuration information to the nvramrc file. Complete the
following steps to run the create_sysidcfg script.
1 Type /cdrom/cdrom0/s0/sai/scripts/create_sysidcfg /var/tmp and then press
1 Type /cdrom/cdrom0/s0/sai/scripts/create_sysidcfg /var/tmp and then press
Enter. The system displays the Enter IP Address of dncsatm [default: 10.253.0.1]
message.
2 Is the default IP address correct?
If yes, press Enter.
If no, type the correct IP address for dncsatm and then press Enter.
Result: The following message appears:
Restarting ntp
Restarting ntp
Sysidcfg information written successfully to nvramrc
Note: Disregard any not found message.
Note: Disregard any not found message.