Cisco Headend Digital Broadband Delivery System Guía Del Usuario
Chapter 1 Staging Preparation
8
4025012 Rev B
Setting Up Download Groups
To stage Tuning Adapters in groups other than the default group, you must
manually add the Tuning Adapters to the DNCS database. See Add Tuning Adapters
to the DNCS Database (on page 8) for more information.
Then, if the download group does not already exist, you must create the CVT
Then, if the download group does not already exist, you must create the CVT
download group for the Tuning Adapter and add the Tuning Adapters to that
group. See Create CVT Download Groups (on page 9) for more information.
Or, if the download group already exists, you must add the Tuning Adapters to the
Or, if the download group already exists, you must add the Tuning Adapters to the
group. See Add the Tuning Adapters to Existing CVT Download Groups (on page 10)
for more information.
Add Tuning Adapters to the DNCS Database
To use a download group other than the default group, your first step is to manually
add the Tuning Adapters to the DNCS database.
Adding Tuning Adapters to the DNCS Database
1 On the DNCS Administrative Console, select the DNCS tab.
2 Select the Home Element Provisioning tab.
3 Click DHCT. The DHCT Provisioning screen opens.
4 Select the New option.
5 Type the MAC address for the Tuning Adapter you are adding in the By MAC
1 On the DNCS Administrative Console, select the DNCS tab.
2 Select the Home Element Provisioning tab.
3 Click DHCT. The DHCT Provisioning screen opens.
4 Select the New option.
5 Type the MAC address for the Tuning Adapter you are adding in the By MAC
Address field.
6 Click Continue. The Set Up DHCT window opens.
7 Select the DHCT Type of the Tuning Adapter you are adding.
8 Type the DHCT Serial Number of the Tuning Adapter you are adding.
9 Click the arrow next to Admin Status and select In Service Two Way.
10 Click Save.
11 Repeat steps 4 through 10 for every Tuning Adapter you need to add to the
7 Select the DHCT Type of the Tuning Adapter you are adding.
8 Type the DHCT Serial Number of the Tuning Adapter you are adding.
9 Click the arrow next to Admin Status and select In Service Two Way.
10 Click Save.
11 Repeat steps 4 through 10 for every Tuning Adapter you need to add to the
database.
12 Your next step is to add the Tuning Adapters to the download group. Do you
need to create the download group for the Tuning Adapters?
If yes, go to Create CVT Download Groups (on page 9)
If no, go to Add the Tuning Adapters to Existing CVT Download Groups (on
page 10)