Cisco Cisco Workload Automation 6.3 Guía Del Usuario

www.cisco.com

Configuring the BusinessObjects BI 
Platform Adapter

Overview

The BOBIP Adapter software is installed as part of a standard installation of Cisco Workload Automation. However, you 
must perform the following steps to license and configure the adapter before you can schedule and run BO BI Platform 
jobs: 



 – Apply the license to the Adapter. You cannot define a BusinessObjects BI Platform 

connection until you have applied the license from Cisco. 



 – Define BusinessObjects BI Platform users that the adapter can use to establish 

authenticated sessions with the BO BI Platform server and permit requests to be made on behalf of the authenticated 
account. 



 – Configure authentication as necessary for your environment.



 – Configure the HTTPS protocol if used in your environment.



 – Define a connection so the master can communicate with the BO 

BI Platform server.

See 

 for details about configuring service.props to control such things as polling, 

output, and log gathering.

Licensing an Adapter

Each CWA Adapter must be separately licensed. You cannot use an Adapter until you apply the license file. If you 
purchase the Adapter after the original installation of CWA, you will receive a new license file authorizing the use of the 
Adapter. 

You might have a Demo license which is good for 30 days, or you might have a Permanent license. The procedures to 
install these license files are described below.

Stop the master:

Windows:

Click 

on Start

 and select All 

.

Verify that the master is displayed in the 

 list and click on the 

 button to stop the master.