Cisco Cisco StadiumVision Mobile Reporter Guía De Instalación
© 2011 Cisco Systems, Inc. All rights reserved
Page 22 of 71
To install an additional DIMM:
3. Remove the shipping screw, if present.
4. Locate the DIMM slots. (See Figure 19).
Figure 19. Cisco ADE 2140 DIMM slots
1
Ejector tab (open)
2
DIMM notch
3
DIMM top connector edge
4
Ejector tab (closed)
5
DIMM outside connector edge
5. Make sure the ejector tabs at both ends of the DIMM slots are pushed
outward to the sides (open position). (See label 1 in Figure 19.)
6. Holding the DIMM by the top edges, remove it from its anti-static package.
Caution! Do not touch the DIMM connectors. Handle the DIMM by the edges
only.
only.