Cisco Cisco StadiumVision Director Manual De Mantenimiento
l
If a resolution is specified in the Control Panel, then the content is resized
according to that setting. This is the requested SV-4K signal resolution shown in
red in
l
If the signal resolution of the SV-4K is set below 1920x1080 for any reason, video
content will be resized according to the template in use.
l
The template in use and the corresponding content must match the signal
resolution.
To set the resolution for a display, complete the following steps:
1. Go to Control Panel > Setup > Devices > Display Specifications.
2. Select the TV that you want to configure.
3. Click Serial Commands.
4. Find the sv4k.videoMode command (
).
Figure 10. SV-4K Resolution Setting in Display Specifications
5. Specify one of the values in
according to the desired resolution
behavior.
Table 17. SV-4K Resolution Values
sv4k.videoMode Value
Resolution
3840x2160x60p
1
Fixed at 2160p
1920x1080x60p
Fixed at 1080p
1280x720x60p
Fixed at 720p
Not Configured
Auto-detected
Auto
Auto-detected
1
This specification is required for 4K TV displays in Release 4.1.
© Cisco Systems, Inc. All rights reserved.
29 of 80