Cisco Cisco StadiumVision Director Manual De Mantenimiento
Audio Cables
Audio cables are not generally needed. However, there are a couple of cases where
you might need to make an audio connection to the SV-4K:
you might need to make an audio connection to the SV-4K:
l
If you need to support an HDMI-to-DVI connection from the SV-4K to the TV since
this supports video only.
this supports video only.
l
If you need to connect to external audio distribution equipment when audio is to
be distributed within an area.
be distributed within an area.
SV-4K RS-232 Serial Pinout
provides the pinout for the DE-9 serial connector on the front panel of the SV-
4K.
Table 7. SV-4K Serial DE-9 Pinout
Pin Description
Pin Description
1
NC
2
Receive data into the
device
device
3
Transmit data out of the
device
device
4
Available 5V@500mA
5
Ground
6
NC
7
RTS
8
CTS
9
NC
Guidelines for Mounting the SV-4K
Consider the following guidelines before mounting the SV-4K:
l
Does not fit in Sunbrite cases that might be in use for some Cisco DMP 4310G
outdoor deployments.
outdoor deployments.
l
Full dimensions with mounting brackets:
196.20 mm long / 164.15 mm wide / 61.65 mm high
(7.72 in long / 6.46 in wide / 2.43 in high)
l
Weight: 28 oz / 793.8 grams.
l
Attach to the wall using the brackets on each side of the device using 4 screws
(one for each bracket slot) that measure between 3.5 mm and 4.2 mm in diameter.
(one for each bracket slot) that measure between 3.5 mm and 4.2 mm in diameter.
l
Avoid blocking the right side panel so that LEDs can be seen for troubleshooting.
l
Ensure all air vents are clear for proper cooling.
© Cisco Systems, Inc. All rights reserved.
7 of 68