Cisco Cisco StadiumVision Mobile Reporter Manual De Mantenimiento
© 2012 Cisco Systems, Inc. All rights reserved.
Page 12 of 27
Custom Screen Templates
Cisco StadiumVision Director 2.4 supports custom screen templates, allowing you
to change the size and arrangements of the regions on the screen to fit the
sponsor/venue needs. Refer to
to change the size and arrangements of the regions on the screen to fit the
sponsor/venue needs. Refer to
Figure 4.
Custom template
Rules for Custom Screen Templates
• You can have only 1 video region (always region 1).
• For the DMP 4310G, the sum of the regions should not exceed 1920 x 1080,
unless you are using overlay, in which case you could have two regions that are
both 1920 x 1080.
both 1920 x 1080.
• Up to five regions are supported for each screen layout (e.g., a 5-region screen
layout). A variable number is supported, but more than 5 will cause degradation.
• When creating custom templates, avoid the following:
-
multiple video regions
-
overlapping regions (unless you are using overlay)
-
too many regions causing performance problems
Overlay Screen Templates
The DMP 4310G supports graphics with transparency/opacity allowing a non-video
region to overlap a video region. This overlay feature can be full screen or assigned
to any region. Refer to
region to overlap a video region. This overlay feature can be full screen or assigned
to any region. Refer to
Figure 6
.
Using the overlay feature you can display:
• A full-screen video region with a full-screen non-video content region overlaid on
top.
• A brand/graphic overlaid in a small region of the screen.
• A ghosted brand/graphic such as a transparent logo where some of the colors in
the logo are transparent and others are not.