Cisco Cisco 1 GHz GainMaker Amplifier Hoja De Datos
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 6
Table 8.
Optional Accessories
Optional Accessories
Part Number
24V Power Supply for GainMaker High Output HGD
4026157
230V AC Crowbar Surge Protector (plug-in, one per station)
715973
Plug-in Inverse Equalizer. Simulates cable equivalent tilts (creates tilt
opposite that of equalizers). Use in place of forward input EQ as needed to
maintain proper output tilt in short spaced locations. Available in
approximately 1.6 dB “cable equivalent” steps from 1.6 to 16.2 dB.
opposite that of equalizers). Use in place of forward input EQ as needed to
maintain proper output tilt in short spaced locations. Available in
approximately 1.6 dB “cable equivalent” steps from 1.6 to 16.2 dB.
4007486 (1.6 dB) sequentially through 4007495 (16.2 dB)
Long Reach Test Point Adapter
562580
Status Monitoring Transponder:
*
See GainMaker Status Monitoring
Transponder data sheet.
*
The housing options listed in Table 9 may be included with the product if ordered using the GainMaker Ordering
Matrix. They may also be ordered separately.
Table 9.
Housing Options
GainMaker System Amplifier Housing: One required housing includes housing base, lid, wiring
harness, and 24V power supply # 4022846. All housings have 15A capacity.
harness, and 24V power supply # 4022846. All housings have 15A capacity.
Part Number
● Uncoated 4-port housing without external test point access
4026387
● Chromate plated 4-port housing without external test point access
4026388
● Uncoated 4-port housing with external test point access
4026385
● Chromate plated 4-port housing with external test point access
4026386
GainMaker System Amplifier Housing Upgrade Kit: One required if upgrading an existing System
Amplifier II, II+, or III housing to allow use of GainMaker System Amplifier modules. Includes a
GainMaker System Amplifier housing lid, wiring harness, and 24V power supply # 4022846.
Amplifier II, II+, or III housing to allow use of GainMaker System Amplifier modules. Includes a
GainMaker System Amplifier housing lid, wiring harness, and 24V power supply # 4022846.
● Uncoated 4-port housing lid without external test point access
4026389
● Painted 4-port housing lid without external test point access
4026390
● Uncoated 4-port housing lid with external test point access
4026391
● Painted 4-port housing lid with external test point access
4026392
Seizure Upgrade Kit: One required if upgrading an existing System Amplifier II or II+ housing base
to allow use of GainMaker System Amplifier modules. Includes high-current (15A) rated seizure
screws and anvils.
to allow use of GainMaker System Amplifier modules. Includes high-current (15A) rated seizure
screws and anvils.
548775
Printed in USA
C78-736685-00 02/16