Cisco Cisco StadiumVision Mobile Reporter Manual De Mantenimiento
© 2011 Cisco Systems, Inc. All rights reserved.
Page 25 of 40
Restoring Default Settings
1. Select DMP Install > Restore Default Settings.
2. In the Device List, select the DMPs on which you want to restore the default
settings.
3. Click the Play button in the Device List to restore the default settings on selected
DMPs. The Dashboard will prompt for confirmation before restoring the default
settings. The DMP reboots after you execute the command.
settings. The DMP reboots after you execute the command.
4. Once the reboot is complete, send the Monitoring > Get Status command to
verify that the DMP is back online. The DMP will be in the factory default state
when this command is successful.
when this command is successful.
Deploying the Initial Configuration
When you first add a DMP to the SV Director database, it is automatically placed in
the factory default state. Before you can proceed with upgrading the firmware and
bringing the DMP online, you need to execute the DMP Install > Initial Config
command. This command moves the DMP out of the factory default state and into the
initial state to enable further operations.
the factory default state. Before you can proceed with upgrading the firmware and
bringing the DMP online, you need to execute the DMP Install > Initial Config
command. This command moves the DMP out of the factory default state and into the
initial state to enable further operations.
You must execute the Initial Config command on all DMPs in the factory default
state (a.k.a. the initial state).
state (a.k.a. the initial state).
Some commands cannot be executed on a DMP that is in the factory default
state. If you try to execute a command to a DMP in the factory default state, an
error message will be displayed on the Console tab in the Device Details panel.
state. If you try to execute a command to a DMP in the factory default state, an
error message will be displayed on the Console tab in the Device Details panel.
Refer to Figure 15.
Figure 15. Factory Default State Error Screen
The DMP Summary panel on the Dashboard shows the number of DMPs
in the factory default state.
in the factory default state.