Cisco Cisco StadiumVision Director Notas de publicación
© 2011 Cisco Systems, Inc. All rights reserved.
13 of 26
Cisco D9022 Encoder
V02.11.10
Cisco D9034 Encoder
V03.03.22
Cisco D9094 Encoder
V04L101
Cisco D9887 Receiver
6.3.2
Cisco D9858 Transcoder
R03.02.00 or later
Cisco Spectra QAM Demodulator
N/A
Technicolor COM100 with COM24 cards
ST02.00.3 or later (to support 3D or sonic Tap)
Technicolor COM200 with COM24 cards
ST02.00.3 or later
Adtec DPI-1200 Ad Server
1.2.23
Adtec TBGS
Windows 2003 Server and adManage Version 2.5.4
Catalyst 6500 Series
IP Base image
12.2.x or above
Catalyst 3750 E-series
IP Services image 12.2.x or above.
Note: Release 12.2(55)SE1 and 12.2(55)SE2 should
be avoided if using PoE to power DMPs with serial
numbers USI1434xxxx or below.
be avoided if using PoE to power DMPs with serial
numbers USI1434xxxx or below.
Catalyst 3560 E-Series
IP Services image 12.2.x or above.
Note: Release 12.2(55)SE1 and 12.2(55)SE2 should
be avoided if using PoE to power DMPs with serial
numbers USI1434xxxx or below.
be avoided if using PoE to power DMPs with serial
numbers USI1434xxxx or below.
Cisco Unified Communications Requirements
Director Release 2.3. All CUAE testing was performed with the latest OS patches applied.
Table 9.
UC Versions Tested With Release 2.3
Cisco Unified Communications
Manager (CUCM)
Cisco IP Phone 7925
Cisco Unified Applications
Environment (CUAE)
Old
6.1(5)
8.5.4
2.4(3)SR1
Newer
7.1(5)
9.0.3
2.4(3)SR1
Newest
7.1(5)
9.1.1SR1
8.5(1)
with StadiumVision 2.3. Earlier maintenance releases other than those listed in the table (for
example CUCM 7.1.3) have not been tested but are also likely to work. Avoid using any major
version that is not listed (for example CUAE 2.5).
example CUCM 7.1.3) have not been tested but are also likely to work. Avoid using any major
version that is not listed (for example CUAE 2.5).
CUAE 8.5 Support
The latest CUAE that is supported and orderable is CUAE v8.5. This CUAE platform is different than
the previous CUAE platforms, thus a different CUAE file will need to be installed for CUAE 8.5
deployments.
the previous CUAE platforms, thus a different CUAE file will need to be installed for CUAE 8.5
deployments.
If you have access to Cisco StadiumVision Director , you can download the file at the following
location:
location: