Cisco Cisco StadiumVision Director Notas de publicación

The value in the Assigned VLAN property in the Management Dashboard settings for the 
DMP 4310s is checked against the value being sent by the DMP, unless you have configured 
$svd_ignore.

DMP auto-registration support requires that the VLAN value is correctly set or “$svd_ignore” is used.

 shows how to configure the Assigned VLAN property under the 4310 v5.x.x Settings for 

DMPs that are not located on the same VLAN using the “$svd_ignore” string. 

When using Cisco StadiumVision Director Release 3.2, be aware of the following limitations and 
restrictions:

Proof of play raw data repository in /var/sv/pofp/raw directory is not part of the backup process. In 
normal operation, a completed script with a green dot already has a copy of the raw data and is part of 
the backup data. No further action is needed aside from generating the PoP report. For completed scripts 
that do not have a green dot, it is very important to investigate or call for support within 60 days of the 
event, after which time the PoP messages in the raw directory will be deleted.

If you have previously accessed a different Cisco StadiumVision Director version on your computer, 
sometimes unexpected behavior or warnings arise, or you might access an older version of the 
interface. In this case, and especially after an upgrade, you must clear your browser cache.

The first release of Cisco StadiumVision Director Release 3.2 implements the infrastructure only to 
support i18n and L10n to support the independent installation of other language packs with Cisco 
StadiumVision Director Release 3.2 as they become available. 

Cisco StadiumVision Director Release 3.2 does not support internationalization for back-end 
messaging.

Non-English characters are not supported as a Cisco StadiumVision Director login credential.