Cisco Cisco 1 GHz GainMaker Amplifier Guía De Instalación
Chapter 2 Installation and Configuration
18
Upgrading an Existing Housing Lid
The GainMaker Line Extender has a new style housing lid that allows easier access
to the line extender power supply. If you are replacing an earlier line extender (LE II
or LE III) with a GainMaker Line Extender, you will have to replace the existing
housing lid with a newer housing lid to accommodate the power supply for the line
extender.
to the line extender power supply. If you are replacing an earlier line extender (LE II
or LE III) with a GainMaker Line Extender, you will have to replace the existing
housing lid with a newer housing lid to accommodate the power supply for the line
extender.
To Install the New Housing Lid
Complete the following steps to upgrade a line extender housing with the newest
housing lid.
housing lid.
CAUTION:
RF connectors and housing seizure assemblies can be damaged if AC shunt
power directors are not removed from the amplifier before installing or
removing the amplifier module from the housing.
power directors are not removed from the amplifier before installing or
removing the amplifier module from the housing.
WARNING:
Before starting this procedure in an aerial or strand mounted application, be
sure to clear the area below the housing of all people, and if possible,
property.
sure to clear the area below the housing of all people, and if possible,
property.
CAUTION:
In an aerial or strand mounted application, you will need to take steps to
ensure that the housing lid does not fall to the ground. See the following
recommended procedure.
ensure that the housing lid does not fall to the ground. See the following
recommended procedure.
1 Use a torque wrench to loosen the housing closure bolts on the housing lid.