Cisco Cisco 1 GHz GainMaker Amplifier Guía De Instalación
Chapter 2 Installation and Configuration
22
Note: The 10-pin keyed connector can be connected one way only. Be sure that
the connector is installed securely to the power supply board.
the connector is installed securely to the power supply board.
5 Proceed to Attaching the Coaxial Connectors (on page 24).
To Set the AC Undervoltage Lockout Selector
Set the AC undervoltage lockout selector for your powering application as specified
by your system engineering guidelines.
by your system engineering guidelines.
Undervoltage Lockout Setting
Application
30 V Lockout
60 VAC System
40 V Lockout
90 VAC System
50 V Lockout
90 VAC System
Complete the following steps to set the AC undervoltage lockout selector:
1 Locate the AC undervoltage lockout selector on the power supply in the housing
1 Locate the AC undervoltage lockout selector on the power supply in the housing
lid.