Cisco Cisco MXE 3500 (Media Experience Engine) Notas de publicación

This software patch addresses CSCty71814.

In a clustered deployment install the patch on the RM and each RN. Use the IP address of the RM 
appliance when applying the patch to the RNs.

Download H264PatchZip.zip from  

Click on Media Experience Engine Patches > Latest Releases > 3.3.1.

Copy the patch to \\mxe_ip_address\media, where mxe_ip_address is the IP address of the RM 
appliance. 

If you have Shared Folder Access enabled, you may be prompted for a password. Enter the 
username as mxe-user and the password you created. 

RDC to the IP address of the RM or RN appliance you want to apply the patch to. 

Go to Start > Run, and enter \\mxe_ip_address\media. The contents of the \\mxe_ip_address\media 
folder are displayed. 

Copy H264Patchzip.zip to the desktop. 

Unzip H264Patch.zip.

Navigate to the H264Patch folder, and double click on H264Patch.bat. 

Check the status of the upgrade at c:\mxepatch.log 

Upon successful completion, 

Patch applied successful

 is displayed. This message confirms that 

the patch is applied successfully.

CSCtx46074.zip provides a fix to CSCtx46074. In a preprocessor profile, when the Aspect Ratio 
Conversion is selected as Letterbox,Curtains, when applicable an encoded video with curtains is 
produced.

Download the software patch, CSCtx46074.zip, from 

Unzip the software patch (CSCtx46074.zip) to get CSCtx46074.bat.