Cisco Cisco Network Services Manager 5.0 Referencia técnica
Page 17
OL-28510-02
If using vPCs, make sure the vPC is up and permits VLANs, as in the following example:
od-l1-n7k-c# show vpc
Legend:
(*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 3
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status : success
Per-vlan consistency status : success
Type-2 consistency status : success
vPC role : primary
Number of vPCs configured : 2
Peer Gateway : Enabled
Peer gateway excluded VLANs : -
Dual-active excluded VLANs : -
Graceful Consistency Check : Enabled
Auto-recovery status : Enabled (timeout = 240 seconds)
vPC Peer-link status
---------------------------------------------------------------------
id Port Status Active vlans
-- ---- ------ --------------------------------------------------
1 Po1 up 1
vPC status
----------------------------------------------------------------------
id Port Status Consistency Reason Active vlans
-- ---- ------ ----------- ------ ------------
5 Po5 up success success 1
7 Po7 up success success 1
od-l1-n7k-c#
DSN VSS
Ensure that the VSS is formed correctly:
od-c3-vss#show switch virtual
Switch mode : Virtual Switch
Virtual switch domain number : 149
Local switch number : 1
Local switch operational role: Virtual Switch Active
Peer switch number : 2
Peer switch operational role : Virtual Switch Standby
od-c3-vss#
Ensure that the VSL link is up:
od-c3-vss#show switch virtual link
VSL Status : UP
VSL Uptime : 5 weeks, 4 days, 2 hours, 47 minutes