Cisco Cisco Unified CallConnector for Microsoft Windows Notas de publicación

This section describes possibly unexpected behavior and describes only severity 1, 2, and 3 caveats. 
Severity 1 caveats are the most serious caveats; severity 2 caveats are less serious. Severity 3 caveats are 
moderate caveats.

This section contains the following topics:

CSCsi88386

The Activation check fails and asks to re-activate the license.

Both the Cisco UCC server and Cisco UCC clients have to be registered through an activation 
process before they can be used. This process sends the serial number and machine information to 
a License server and saves an activation record on the local computer. Every time the applications 
are run , this activation record is checked to verify the license.

In some situations , sometimes after a PC is re-booted or if the network adapters are disabled, then 
this activation check fails even though the a valid license is installed on the PC. This failure has also 
shown up on PC with Microsoft Windows Virtual Machines or virtual adapters.

As a workaround, you can enable the network adapter and re-start the Cisco UCC application or 
from the Popup About dialog clear and re-apply the serial number and activate the license again. 

CSCsl88900

Co-existence issue with Skystone (stonevoice) Gateway; Related issues have been found with Office 
Communication Server. Overlap with Cisco UCC Server ports. 

As a workaround, need to install these components on another machine. 

CSCsm75174

Cisco UCC client does not work properly with CIPC.

In the Cisco UCC Server configuration, when the CIPC is closed, the connection to the ephone is 
dropped. The Cisco UCC Server will try to re-establish connection every six minutes. 

As a workaround, you will need to wait at least six minutes before the connection to the CIPC is 
restored.