Cisco Cisco Edge 340 Digital Media Player Notas de publicación

For Cisco Show and Share 5.2.1, you can import signed certificates. Before performing the certificate 
import, be sure to read about the caveats in the 

chapter of Administration Guide for Cisco Digital Media Suite 5.2.x Appliances.

Review 

 before you begin working with Cisco DMS 5.2 components. These are known 

limitations that will not be fixed in the 5.2.x release. Read the 

 

section for additional information.

Creating a system task to turn on/off syslog service on DMP.

To turn the syslog service on, create a new system task with the request type of SET and the 

request init.syslog=on&mib.save=1&mng.reboot=1. To turn the syslog service off, create a new system task 
with the request type of SET and the request init.syslog=off&mib.save=1&mng.reboot=1. 

PoP: need a system task to bulk configure syslog server IP on DMP.

Apply a system task to all DMPs that will be used for PoP with a request type of SET and the 

request 
init.syslog=on&init.syslog_collector=IP_ADDRESS_OF_THE_POP_SERVER&mib.save=1&mng.rebo
ot=1.

Errors occur on DMP 4400G and DMP 4305G endpoints when video links are configured as the startup URL.

None. Use the video URL instead.

Video stops playing on the DMP 4305G when you insert a flash drive into the USB interface.

Do not insert a flash drive when the DMP 4305G is active. Only insert the flash drive when the 

DMP is idle, and then restart.