Cisco Cisco Intelligent Automation for Cloud 4.3.1 Guía De Instalación
59
Using the Cisco IAC 4.3.1 Management Appliance
Configuring the Management Appliance
c.
Enter a password for the application server.
d.
Press ENTER.
e.
Re-enter the password and press ENTER again.
7.
Type 7.
(7) Setup: Enable SSL Support
a.
Enter Y or Yes to enable SSL support. A self-signed certificate will be generated.
Note:
The self-signed SSL certificate can be replaced with a valid SSL certificate after the Cisco IAC Management
Appliance has been deployed.
b.
Press ENTER.
8.
Type 8.
(8) Setup: Time Zone
a.
Enter the time zone in UTC (Universal Time Code) format, such as “UTC-5” for Eastern Time. This is sometimes
also referred to as GMT, or Greenwich Mean Time.
also referred to as GMT, or Greenwich Mean Time.
Note:
You must include the text, UTC, as well as the number of hours either before or after the Prime Meridian, as a
negative (-) or positve (+) number. There should be no spaces. For example, UTC+8. For additional help, see
.
b.
Press ENTER.
9.
Type 9.
(9) Setup: Enable NTP Support
a.
Enter Y or Yes to enable the NTP client.
b.
Press ENTER.
10.
Type 10.
(10) Setup: NTP Server IP/Hostname
a.
Enter the IP address or host name for your NTP server.
Note:
Leave this option blank if NTP is not enabled above or a value is supplied by your DHCP server. This value will
be overridden by the NTP server supplied by your DHCP server.
b.
Press ENTER.
11.
Type 11.
(11) Setup: PostgreSQL System DBA Password
Note:
The Management Appliance's credential manager uses a PostgreSQL database.
a.
Enter a password for the database administrative accounts (“postgres”). Alphanumeric characters only.
b.
Press ENTER.
c.
Re-enter the password and press ENTER again.