Cisco Cisco StadiumVision Mobile Manual De Mantenimiento
l
For each channel that should appear in the channel lineup accessed by a Cisco
IP Phone or IR remote, set the “Visible in IP Phone Guide” field on the Channels
panel to Yes.
l
For each channel that is to appear in the channel lineup accessed by a third-party
touch panel, set the “Visible in 3
rd
Party Guide” field on the Channels panel to
Yes.
Adding Channels to the Master Channel List
User Roles
Administrator / Content Manager
To add channels to the master channel list, complete the following steps:
1. Open the Control Panel and select the Setup > Channels. The Master Channel
List displays in the Master Channel List tab.
2. Click “+” at the top of the Master Channel List.
3. On the Basic Info tab, define the information listed in
. The description
and source ID are optional.
NOTE: The Channel name configured in StadiumVision Director
should be limited to 12 characters or less. Due to the space
allotted for channel names on the IP Phone interface, more than
12 characters may have undesirable results.
Table 21. Adding a Channel to the Master Channel List
Field
Description
Channel
Name
The name of the channel as you would like it to appear on the channel guide that
appears on your video displays. A maximum of 12 characters are supported.
Description
Description of what is playing on the channel (optional). This shows up on the TV only.
Multicast
Address
The multicast IP address of this channel designated at the StadiumVision headend.
Port
The multicast port used to communicate with this channel as designated at the
StadiumVision headend.
Channel
Number
The number you want to assign to this channel. This channel number will appear in the
channel guides on the TVs and IP Phones.
Source ID
Placeholder for future program guide integration. Not required.
© Cisco Systems, Inc. All rights reserved.
113 of 285