Cisco Cisco SF302-08PP 8-port 10 100 PoE+ Managed Switch Referencia técnica
SSH Client Commands
78-21485-01 Command Line Interface Reference Guide
137
6
Parameters
None
Default Configuration
SSH server authentication is disabled
Command Mode
Global configuration
User Guidelines
When remote SSH server authentication is disabled, any remote SSH server is
accepted (even if there is no entry for the remote SSH server in the SSH Trusted
Remote Server table).
accepted (even if there is no entry for the remote SSH server in the SSH Trusted
Remote Server table).
When remote SSH server authentication is enabled, only trusted SSH servers are
accepted. Use the
accepted. Use the
command to configure trusted
SSH servers.
Example
The following example enables SSH server authentication:
switchxxxxxx(config)
# ip ssh-client server authentication
6.6
ip ssh-client server fingerprint
Use the ip ssh-client server fingerprint command in Global configuration mode to
add a trusted server to the Trusted Remote SSH Server Table. To remove an entry
or all entries from the Trusted Remote SSH Server Table, use the no form of the
command.
add a trusted server to the Trusted Remote SSH Server Table. To remove an entry
or all entries from the Trusted Remote SSH Server Table, use the no form of the
command.
Syntax
ip ssh-client server fingerprint {
host
|
ip-address
}
fingerprint
no ip ssh-client server fingerprint [
host
|
ip-address
]
Parameters
•
host—DNS name of a SSH server.