Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Manual De Mantenimiento
Client Quality of Service
ACL
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
122
7
•
Source IPv6 Prefix Length—Enter the prefix length of the source IPv6
address.
address.
•
Source Port—Select this option to include a source port in the match
condition for the rule. The source port is identified in the datagram header. If
selected, choose the port name or enter the port number.
condition for the rule. The source port is identified in the datagram header. If
selected, choose the port name or enter the port number.
•
Destination IPv6 Address—Select this field to require a packet's
destination IPv6 address to match the address listed here. Enter an IPv6
address in the appropriate field to apply this criteria.
destination IPv6 address to match the address listed here. Enter an IPv6
address in the appropriate field to apply this criteria.
•
Destination IPv6 Prefix Length—Enter the prefix length of the destination
IPv6 address.
IPv6 address.
•
Destination Port—Select this option to include a destination port in the
match condition for the rule. The destination port is identified in the datagram
header. If selected, choose the port name or enter the port number.
match condition for the rule. The destination port is identified in the datagram
header. If selected, choose the port name or enter the port number.
•
IPv6 Flow Label—A 20-bit number that is unique to an IPv6 packet. It is used
by end stations to signify QoS handling in routers (range 0 to 1048575).
by end stations to signify QoS handling in routers (range 0 to 1048575).
•
IP DSCP—Matches packets based on their IP DSCP value. If selected,
choose one of these options as the match criteria:
choose one of these options as the match criteria:
-
Select From List—DSCP Assured Forwarding (AS), Class of Service
(CS), or Expedited Forwarding (EF) values.
(CS), or Expedited Forwarding (EF) values.
-
Match to Value—A custom DSCP value, from 0 to 63.
For a MAC ACL, configure these parameters:
•
EtherType—Select to compare the match criteria against the value in the
header of an Ethernet frame.
header of an Ethernet frame.
Select an EtherType keyword or enter an EtherType value to specify the
match criteria.
match criteria.
-
Select from List—Select one of these protocol types: appletalk, arp,
ipv4, ipv6, ipx, netbios, pppoe.
ipv4, ipv6, ipx, netbios, pppoe.
-
Match to Value—Enter a custom protocol identifier to which packets are
matched. The value is a four-digit hexadecimal number in the range of
0600 to FFFF.
matched. The value is a four-digit hexadecimal number in the range of
0600 to FFFF.
•
Class of Service—Select this field and enter an 802.1p user priority to
compare against an Ethernet frame.
compare against an Ethernet frame.
The valid range is from 0 to 7. This field is located in the first/only 802.1Q
VLAN tag.
VLAN tag.