Cisco Cisco UCS B200 M3 Blade Server Hoja De Datos
Cisco UCS B420 M3 Blade Server
CONFIGURING the SERVER
23
STEP 8
ORDER INTERNAL USB 2.0 DRIVE (OPTIONAL)
You may order one optional internal USB 2.0 drive. The USB drive ordering information is listed
in
in
See
for the location of the USB connector.
Table 14
USB 2.0 Drive
Product ID (PID)
PID Description
UCS-USBFLSH-S-4GB
4GB Flash USB Drive (shorter length) for all M3 servers
NOTE: A clearance of 0.950 inches (24.1 mm) is required for the USB device to be
inserted and removed (see the following figure).
inserted and removed (see the following figure).
NOTE: When the Cisco 4GB USB key is purchased with a server, it is pre-installed
into the internal USB port and held firmly in place with a clip to protect it from
shock and vibration during shipment and transportation. This clip also prevents the
USB key from undergoing shock and vibration during ongoing customer operational
use.
into the internal USB port and held firmly in place with a clip to protect it from
shock and vibration during shipment and transportation. This clip also prevents the
USB key from undergoing shock and vibration during ongoing customer operational
use.