Cisco Cisco Firepower 4120 Security Appliance
Updating a Radware Signature File
You can upload an updated Radware signature file to a DefensePro device from the following sources:
•
Radware.com or the proxy file server that is configured in the Vision Server Connection
configuration
configuration
—
The Alerts pane displays a success or failure notification and whether the operation
was performed using a proxy server.
•
APSolute Vision client system
—
The name of the signature file must be
<DEVICE-MAC-ADDRESS>.sig
.
Caution:
Updating the signature file consumes large amounts of resources, which may cause the device to go
temporarily into an overload state. Radware recommends updating the signature file during hours of low activity.
Note:
You can schedule signature-file updates in the APSolute Vision scheduler.
To update the signature file of a device
1.
In the device pane, select the device.
2.
Click the arrow of the
(Operations) icon.
3.
Select Update Security Signatures.
4.
Configure the parameters, and click Update.
Table 107: Update Device Signature File Parameters
Parameter
Description
Signature Type
The type of the signature file to upload to the device. Values:
•
Radware Signatures
•
RSA Signatures
Update From
The location of the signature file to upload.
Values:
Values:
•
Radware.com—APSolute Vision uploads the signature file directly from
Radware.com or from the proxy server that is configured in the Vision
Server Connection configuration.
•
Client—APSolute Vision uploads the signature file from the APSolute
Vision client system. This option is only available for Radware
signatures.
© 2016 Cisco | Radware. All rights reserved. This document is Cisco Public.
Page 159 of 281