Cisco Cisco Firepower 4120 Security Appliance
Downloading a Technical Support File Using CLI
Using the CLI, you can save a technical-support file to the Radware DefensePro DDoS Mitigation device under
the
/mnt/cf/downloads
directory.
The name of the support file is
support.tar
. You can
copy the file using SCP.
To download a technical-support using CLI
>
In the CLI, run the following command:
manage support save-file
Managing DefensePro Device Configurations
This section describes how to manage configurations of the DefensePro devices that are configured on APSolute
Vision.
DefensePro Configuration File Content
The configuration file content is divided into two sections:
•
Commands that require rebooting the device
—
These include Application Security status, Operation
Mode, tuning parameters, and so on. Copying and pasting a command from this section takes effect only
after the device is rebooted. The section has the heading:
The following commands will take effect
only once the device has been rebooted!
•
Commands that do not require rebooting the device
—
Copying and pasting a command from this
section takes effect immediately after pasting. The commands in the section are not bound to SNMP. The
section has the heading:
The following commands take effect immediately upon execution!
The commands are printed within each section—in the order of implementation.
At the end of the file, the device prints the signature of the configuration file. This signature is used to verify the
At the end of the file, the device prints the signature of the configuration file. This signature is used to verify the
authenticity of the file and that it has not been corrupted. The signature is validated each time the configuration
file is uploaded to the device. If the validity check fails, the device accepts the configuration, but a notification is
sent to the user that the configuration file has been tampered with and there is no guarantee that it works. The
signature looks like
File Signature: 063390ed2ce0e9dfc98c78266a90a7e4
.
Downloading a Device-Configuration File
You can download a configuration file from a managed device to APSolute Vision, for backup. If you choose to
download to the APSolute Vision server, a copy is always saved in the APSolute Vision database.
Downloading a Device-Configuration File Using APSolute Vision
By default, you can save up to five (5) configuration files per device on the APSolute Vision server. You can change
this parameter in the APSolute Vision Setup page up to a maximum of 10. When the limit is reached, you are
prompted to delete the oldest file.
© 2016 Cisco | Radware. All rights reserved. This document is Cisco Public.
Page 161 of 281