Brother HL-1850 Guía Del Usuario

CHAPTER 2 TCP/IP PRINTING 

2-9

 

 
Brother print servers will work with IBM LAN Server, OS/2 Warp Server 
networks that have IBM TCP/IP V2.0 or later installed on the file server (TCP/IP 
is supplied as standard with LAN Server V4.0 and later as well as Warp Server). 
Use the following procedure to configure the print server on an LAN Server or 
OS/2 Warp Server file server, or on an OS/2 Warp Connect workstation: 
 

 
Make sure that TCP/IP software is installed on your OS/2 file server. If you have 
not already done so, open the TCP/IP folder on the desktop, and double click on 
the TCP/IP Configuration icon to add the IP address to the OS/2 file server 
(consult your system manager for this address). 
 
Refer to 

 for information on how to assign an IP address to the printer. 

 

 

1.  From the OS/2 desktop open the Templates folder. Use the right mouse 

button to drag the Printer icon (not the Network Printer icon) onto the 
desktop. 

2.  The Create a Printer window should be open (if it is not, double click on 

the printer icon). 

3.  Type in any name for the printer. 
4.  Select the default printer driver. If the desired printer driver is not listed, 

click on the Install new Printer Driver button and add the driver. 

5.  Choose the output port. IBM TCP/IP automatically creates 8 named 

pipes called  \PIPE\LPD0 through to \PIPE\LPD7. Pick an unused 
port and double click on it. 

 
Early versions of Warp Server have a bug in which the named pipes do not 
appear (the problem does not affect Warp Connect or LAN Server). This problem 
is fixed via a patch available from IBM.