Brother HL-1850 Guía Del Usuario

CHAPTER 6 NOVELL NETWARE PRINTING 

6-15

 

15.  Highlight the Printers option in the print server Information menu. 
16.  Press INSERT and select the name of the printers you entered in Step 12. 
17.  Press ESCAPE several times to return to DOS.  
18.  Execute the BRCONFIG from the Windows menu. 
 

Select the print server from the list of print servers. When you get the 
message that the print server is connected, press the ENTER key and 
type the default password of "access" in response to the "#" prompt (the 
password will not echo), and then press the ENTER key again in 
response to the ENTER Username> prompt. When you get the 
Local>

 prompt, type: 

 
SET SERVICE service TREE tree 

 

SET SERVICE service CONTEXT Context 

 

Where tree is the NDS tree name. 
• 

Where context is the name of context where the print server resides. 

• 

Service is the name of the service assigned by NetWare print server 
name (where the default services are BRN_xxxxxx_P1 for the 
Brother printer, where "xxxxxx" is the last six digits of the Ethernet 
address (MAC address)). 

• 

You can also enter the TREE and CONTEXT name using your web 
browser by connecting to the Brother print server using the TCP/IP 
protocol and selecting the NetWare protocol configuration. 

 
19.  Use the BRCONFIG command or TELNET command: SET NETWARE 

RESCAN to force the print server to rescan for file servers, or power 
cycle the printer. 

 
The same services assigned by NetWare print server names cannot be used for 
both queue server mode and remote printer mode. 
 
The same service assigned by NetWare print server cannot be used for both 
queue server mode and remote printer mode. If you want to enable remote printer 
capabilities on a service other than the default NetWare service, you must define 
new services that are enabled for NetWare and for the desired port. Refer to 

 in this manual for information on how to do this.