Brother Innov-is 6000D Guía De Operación
4
* The LED pointer turns off automatically by lowering the
presser foot or returning to the previous page.
Adjusting the LED Pointer
Adjust the LED pointer if it indicates a point different
than the actual needle drop point.
Before adjusting the LED pointer, mark the actual
needle drop point on the fabric to be embroidered, and
then hoop the fabric and attach the embroidery frame.
than the actual needle drop point.
Before adjusting the LED pointer, mark the actual
needle drop point on the fabric to be embroidered, and
then hoop the fabric and attach the embroidery frame.
a
Press
.
→ The settings screen appears.
b
Press
.
→ The Embroidery settings screen appears.
c
Display page 8 of the Embroidery settings
screen.
screen.
d
Press
.
→ The Embroidery Foot “W2” with LED Pointer
Adjustment screen appears.
a
LED pointer adjustment
e
Use
or
to adjust the LED pointer so
that it indicates the actual needle drop point.
f
Press
twice to return to the original
screen.
Memo
• When the LED pointer is turned on, the presser foot
height is automatically adjusted according to the
fabric thickness.
fabric thickness.
• If
is pressed again, the fabric thickness is
remeasured and the presser foot is set to the
optimum height.
optimum height.
• If the embroidery foot “W2” is not attached,
appears in gray.
Note
• With thick elastic fabric, the position will be
misaligned only at raised parts in the fabric. In this
case, manually adjust the position according to the
thickness of the fabric.
case, manually adjust the position according to the
thickness of the fabric.
• With fabric that has a very uneven surface such as
quilting, the position is not correctly aligned. In this
case, the pointer indication should be used only as a
reference.
case, the pointer indication should be used only as a
reference.
Memo
• When using the “Embroidery” or “Embroidery Edit”,
touch
to directly access the Embroidery
settings screen.
Note
• The specified setting is saved in the machine’s
memory. This is useful for positioning during
continuous embroidering.
continuous embroidering.
• For normal use, return the setting to “00”.
a