Brother Innov-is 6000D Guía De Operación
2
Using the Embroidery Foot “W2” with LED Pointer
Included Embroidery foot with LED pointer indicates the needle position with a red LED point.
The LED pointer shows you the location of the needle penetration so that it is easier to adjust the embroidery
position.
The LED pointer shows you the location of the needle penetration so that it is easier to adjust the embroidery
position.
Included Item
Attaching Embroidery Foot “W2”
a
Press the “Needle Position” button to raise
the needle.
the needle.
b
Press
to lock all keys and buttons.
→ The entire screen becomes white, and all keys and
operation buttons are locked.
c
Raise the presser foot lever.
d
Push the black button on the presser foot
holder and remove the presser foot.
holder and remove the presser foot.
a Black button
b Presser foot holder
→ Remove the presser foot from the presser foot
→ Remove the presser foot from the presser foot
holder.
e
Use the screwdriver included with your
machine to remove the screw of the presser
foot holder, then remove the presser foot
holder.
machine to remove the screw of the presser
foot holder, then remove the presser foot
holder.
a Screwdriver
b Presser foot holder
c Presser foot holder screw
→ Remove the screw and presser foot holder.
→ Remove the screw and presser foot holder.
Part name
Part code
Embroidery foot “W2” with LED
pointer
XF6319-001
CAUTION
• When attaching a presser foot, always press
on the screen. You may accidentally
press the “Start/Stop” button and possibly
cause injury.
cause injury.
• Be sure to use the embroidery foot “W2” or
“W” (included with your machine) when
doing embroidery. Using another presser foot
may cause the needle to strike the presser foot,
causing the needle to bend or break and
possibly cause injury.
doing embroidery. Using another presser foot
may cause the needle to strike the presser foot,
causing the needle to bend or break and
possibly cause injury.
Note
• Instead of simply loosening the screw, it
must be temporarily removed, while the
embroidery foot “W” included with your
machine can be installed simply by
loosening the screw.
embroidery foot “W” included with your
machine can be installed simply by
loosening the screw.
b
a