Samsung SL-M4080FX Manual De Usuario

 

Samsung does not recommend using a non-genuine Samsung toner 
cartridge such as refilled or remanufactured. Samsung cannot guarantee a 
non-genuine Samsung toner cartridge's quality. Service or repair required 
as a result of using non-genuine Samsung toner cartridges will not be 
covered under the machine warranty.

 

10 

•

•

 The estimated life of

 the toner cartridge is 
close.

Prepare a new toner cartridge for a 
replacement. You may temporarily 
increase the printing quality by 
redistributing the toner (see 
"Redistributing toner" on page 
277).

•

•

The indicated toner 
cartridge has almost 
reached its estimated 

cartridge life

a

. 

•

You can choose Stop or 
Continue as shown on the 
control panel. If you select Stop, 
the printer stops printing. If you 
select Continue, the printer 
keeps printing but the printing 
quality cannot be guaranteed.

•

Replace the toner cartridge for 
the best print quality when this 
message appears. Using a 
cartridge beyond this stage can 
result in printing quality issues 
(see "Replacing the toner 
cartridge" on page 279). If the 
machine stops printing, replace 
the toner cartridge (see 
"Replacing the toner cartridge" 
on page 279).

The indicated toner 
cartridge has reached 
its estimated cartridge 

. 

Replace the toner cartridge with a 
Samsung-genuine toner cartridge 
(see "Replacing the toner 
cartridge" on page 279).

a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates 

the average capacity of print-outs and is designed pursuant to ISO/IEC 19752 (see "Available 
consumables" on page 272). The number of pages may be affected by operating 
environment, percentage of image area, printing interval, media, percentage of image area, 
and media size. Some amount of toner may remain in the cartridge even when replace new 
cartridge appears and the machine stops printing.

The output tray is full.

Remove papers from 
the output tray, the 
printer resumes 
printing.

There is no paper in the 
indicated tray.

Load paper in the tray 
(see "Loading paper in 
the tray" on page 68).