Samsung SL-X7400GX Manual De Usuario
Solving other problems
272
10. Troubleshooting
21
Scanning problems
Condition
Suggested solutions
The scanner does not work.
•
Make sure that you place the original to be
scanned face down on the scanner glass, or
face up in the DSDF.
scanned face down on the scanner glass, or
face up in the DSDF.
•
There may not be enough available memory
to hold the document you want to scan. Try
the Prescan function to see if that works. Try
lowering the scan resolution rate.
to hold the document you want to scan. Try
the Prescan function to see if that works. Try
lowering the scan resolution rate.
•
Check that the machine cable is connected
properly.
properly.
•
Make sure that the machine cable is not
defective. Switch the cable with a known
good cable. If necessary, replace the cable.
defective. Switch the cable with a known
good cable. If necessary, replace the cable.
•
Check that the scanner is configured
correctly.
correctly.
The unit scans very slowly.
•
Check if the machine is printing received
data. If so, scan the document after the
received data has been printed.
data. If so, scan the document after the
received data has been printed.
•
Graphics are scanned more slowly than text.
•
Communication speed slows in scan mode
because of the large amount of memory
required to analyze and reproduce the
scanned image. Set your computer to the
ECP printer mode through BIOS setting. It
will help to increase the speed. For details
about how to set BIOS, refer to your
computer user’s guide.
because of the large amount of memory
required to analyze and reproduce the
scanned image. Set your computer to the
ECP printer mode through BIOS setting. It
will help to increase the speed. For details
about how to set BIOS, refer to your
computer user’s guide.
Message appears on your
computer screen:
computer screen:
•
Device can’t be set to the
H/W mode you want.
H/W mode you want.
•
Port is being used by
another program.
another program.
•
Port is Disabled.
•
Scanner is busy receiving
or printing data. When the
current job is completed,
try again.
or printing data. When the
current job is completed,
try again.
•
Invalid handle.
•
Scanning has failed.
•
There may be a copying or printing job in
progress. Try your job again when that job is
finished.
progress. Try your job again when that job is
finished.
•
The selected port is currently being used.
Restart your computer and try again.
Restart your computer and try again.
•
The machine cable may be improperly
connected or the power may be off.
connected or the power may be off.
•
The scanner driver is not installed or the
operating environment is not set up
properly.
operating environment is not set up
properly.
•
Ensure that the machine is properly
connected and the power is on, then restart
your computer.
connected and the power is on, then restart
your computer.
•
The USB cable may be improperly connected
or the power may be off.
or the power may be off.
Condition
Suggested solutions