Samsung SL-X7400GX Manual De Usuario
Printing on special media
64
2. Media and Tray
-
Construction: Prior to printing, envelopes should lie flat with less than
6 mm (0.25 inches) curl and should not contain air.
6 mm (0.25 inches) curl and should not contain air.
-
Condition: Envelopes should not be wrinkled, nicked, damp, or
damaged.
damaged.
-
Temperature: Use envelopes that are compatible for use in Laser
Printers.
Printers.
•
Use only well-constructed envelopes with sharp and well-creased folds.
•
Do not use stamped envelopes.
•
Do not use envelopes with clasps, snaps, windows, coated lining, self-
adhesive seals, or other synthetic materials.
adhesive seals, or other synthetic materials.
•
Do not use damaged or poorly made envelopes.
•
Be sure the seam at both ends of the envelope extends all the way to the
corner of the envelope.
corner of the envelope.
1
Acceptable
2
Unacceptable
•
Envelopes with a peel-off adhesive strip or with more than one flap that
folds over to seal must use adhesives compatible with the machine’s fusing
temperature of about 170°C (338 °F) for 0.1 second. The extra flaps and strips
might cause wrinkling, creasing, or jams, and may even damage the fuser.
folds over to seal must use adhesives compatible with the machine’s fusing
temperature of about 170°C (338 °F) for 0.1 second. The extra flaps and strips
might cause wrinkling, creasing, or jams, and may even damage the fuser.
•
For the best print quality, position margins no closer than 15 mm (0.6
inches) from the edges of the envelope.
inches) from the edges of the envelope.
•
Avoid printing over the area where the envelope’s seams meet.
•
Do not attempt to print on the back of envelopes.
•
Wrinkles may appear while printing envelopes.