Samsung SL-X7400GX Manual De Usuario

8 

To avoid damaging the machine, use only transparencies designed for use in 

laser printers.

 

•

In case of color printing using transparencies, the picture quality would 
be lower than mono printing when the printouts are used on the 

overhead projector.

 

•

Transparencies used in the machine must be able to withstand the 
machine’s fusing temperature.

•

Place them on a flat surface after removing them from the machine.

•

Do not leave unused transparencies in the paper tray for long periods of 
time. Dust and dirt may accumulate on them, resulting in spotty printing.

•

To avoid smudging caused by fingerprints, handle them carefully.

•

To avoid fading, do not expose printed transparencies to prolonged 
sunlight.

•

Ensure that transparencies are not wrinkled, curled, or have any torn edges.

•

Do not use transparencies that separates from the backing sheet.

•

To prevent transparencies from sticking to each other, do not let the printed 
sheets stack up as they are begin printed out.

•

Recommended media: Transparency for a color laser printer by Xerox, such 
as 3R 91331(A4), 3R 2780(Letter).

•

Prints made on transparency film with this printer are not compatible with 
overhead projectors and may appear as a black and white image if 
projected.

9 

Load the paper with the side to be printed on facing down.

To avoid damaging the machine, use only labels designed for use in laser 

machines.

•

When selecting labels, consider the following factors:

-

Adhesives: The adhesive material should be stable at your machine’s 
fusing temperature of about 170°C (338 °F) for 0.1 second.