Samsung SL-C4060FX Manual De Usuario

Copying problems | 

272

Copying problems

Condition

Suggested solutions

Copies are too light 
or too dark.

Adjust the darkness in copy feature to lighten or darken the 
backgrounds of copies.

Smears, lines, 
marks, or spots 
appear on copies.

•  If the defects are on the original, adjust darkness in copy feature to 

lighten the background of your copies.

•  If there are no defects on the original, clean the scan unit (see 

Copy image is 
skewed.

•  Ensure that the original is aligned with the registration guide.

•  The transfer roller may be dirty. Clean the inside of your machine (see 

•  The skew caused by Dual Scan Document Feeder (DSDF) need to 

adjust the hinges. Contact a service representative.

Blank copies print 
out.

Ensure that the original is face down on the scanner glass or face up in 
the document feeder.

If these steps do not correct the problem, contact a service 
representative.

Image rubs off the 
copy easily.

•  Replace the paper in the tray with paper from a new package.

•  In high humidity areas, do not leave paper in the machine for 

extended periods of time.

Frequent copy 
paper jams occur.

•  Fan the paper, then turn it over in the tray. Replace the paper in the 

tray with a fresh supply. Check/adjust the paper guides, if necessary.

•  Ensure that the paper is the proper type and weight (see "Print media 

•  Check for copy paper or pieces of copy paper remaining in the 

machine after a paper jam has been cleared.

Toner cartridge 
produces fewer 
copies than 
expected before 
running out of 
toner.

•  Your originals may contain pictures, solids, or heavy lines. For 

example, your originals may be forms, newsletters, books, or other 
documents that use more toner.

•  The Dual Scan Document Feeder (DSDF) may be left open while 

copies are being made.

•  Turn the machine off and back on.