Samsung Networked Color Multifunction Printer Manual De Usuario

.1   

<Network setup (CLX-2160N only)>

This chapter gives you step-by-step instructions for setting up your 

machine for network connections.
This chapter includes:
•

Once you have connected your machine to a network with an RJ-45 

Ethernet cable, you can share the machine with other network users.
You need to set up the network protocols on the machine to use it as your 

network printer. Protocols can be set up by the following two methods: 

You can configure your machine’s print server settings and manage the 

machine via the following programs that came with your machine:
• SyncThru™ Web Admin Service: A web-based printer 

management solution for network administrators. SyncThru™ Web 
Admin Service

 provides you with an efficient way of managing 

network devices and lets you remotely monitor and troubleshoot 

network printers from any site with corporate intranet access.

• SyncThru™ Web Service: A web server embedded to your network 

print server, which allows you to:
- Configure the network parameters necessary for the machine to 

connect to various network environments.

- Customize printer, copy, and fax settings.

• SetIP: A utility program allowing you to select a network interface and 

manually configure the addresses for use with the TCP/IP protocol.

For further details, refer to the user’s guide on the network utilities CD 

that came with your machine.

You can set up the following basic network parameters through the 

machine’s control panel:
• Configure TCP/IP
• Configure Ethernet Speed

The following table shows the network environments supported by the 

machine: 

• TCP/IP: Transmission Control Protocol/Internet Protocol
• IPP: Internet Printing Protocol

• SNMP: Simple Network Management Protocol
• DHCP: Dynamic Host Configuration Protocol

• BOOTP: Bootstrap Protocol

Your machine can be set up with a variety of TCP/IP network information, 

such as an IP address, a subnet mask, a gateway, and DNS addresses. 

There are several ways in which your machine can be assigned a TCP/

IP address, depending on your network.
• Static addressing: A TCP/IP address is assigned manually by the 

system administrator.

• Dynamic addressing via BOOTP/DHCP: A TCP/IP address is 

assigned automatically by the server.

To enter a TCP/IP address from your machine’s control panel, take the 

following steps: 

Press Menu until Copy Menu appears on the bottom line of the 

display and press OK.

Press the Scroll buttons until Network appears and press OK.

Press OK when TCP/IP appears.

Press the Scroll buttons until Static appears and press OK.

Press OK when IP Address appears. 

Network interface

• Ethernet 10/100 Base-TX

Network operating 

system

• Windows 98/Me/2000/XP/2003/Vista

• Various Linux OS

• Macintosh OS 10.3 ~ 10.5

Network protocols

• TCP/IP  

• IPP, SNMP

Dynamic addressing 

server

• DHCP,  BOOTP

Before configuring TCP/IP, you need to set the network protocol 

to TCP/IP.